Subscribe to Machinery Listing Service

Web Site:

All Brands and Sizes, G & L, Pama, Mitsubishi, Sachem, TOS, Shibura

Phone:

Fax:

Email:

0490 BORING MILLS, HORIZ, TABLE

Need (Minimum) 5inch HBM, Table Type - WITH FACING HEAD- at least 28" Diam,- for roughing. Tailstock NOT essential.

Phone:

Fax:

Email:

sales@machineco.com

Web Site:

http://www.machineco.com

Need (Minimum) 5inch HBM, Table Type - WITH FACING HEAD- at least 28" Diam,- for roughing. Tailstock NOT essential.

Phone:

Fax:

Email:

sales@machineco.com

Web Site:

http://www.machineco.com

0496 BORING MILLS, FLOOR TYPE, NC/CNC

30’ x 12’, Right Angle Head. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

0500 BORING MILLS, VERTICAL - INCLUDING VERTICAL TURRET

2-12 Meters: All Brands- Manual And CNC

Phone:

Fax:

Email:

60”

Phone:

Fax:

Email:

BULLARD ONLY, 42"-48", MUST HAVE SIDE HEAD, 4-JAW MIN., 1965 OR NEWER, MUST BE NICE

Phone:

Fax:

Email:

Web Site:

42"-48"+, 4-JAW +, MUST HAVE SIDE HEAD, TURRET HEAD +, BULLARD +, 1965+

Phone:

Fax:

Email:

Web Site:

0502 BORING MILLS, VERT, NC/CNC

50"-160" Dia., Manual or CNC, 2-Axis or Live Tool

Phone:

Fax:

Email:

Web Site:

0530 BRAKES, PRESS

100 Ton, CNC Type, 6’ Bed, CNC Back Gauge, Send Quotes w/ Photos To Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

0535 BRAKES, OTHERS

CNC Press Type, 50 Ton, 6’ Bed, 2-4 Axis CNC Backgauge, Quality Brands Only, Late Model, Under $50K. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

0665 CRANKSHAFT MACHINERY, NC/CNC

Heller, Landis, GFM, Toyoda, Ingersol, Schaudt, Junker; ’90 or Newer

Phone:

Fax:

Email:

1010 CRANES

Customer needs 10 Ton, 80' Span Overhead Crane. Customer is ready to move quickly. Please fax quotations ASAP.

Phone:

Fax:

Email:

Web Site:

Customer is looking for a 50,000 lbs. Straddle Lift (Travel/Mobile Crane, Hoist) to use in a Steel Fabricating facility.

Phone:

Fax:

Email:

Web Site:

Our Customer needs (1) 63' Span (NOTHING SHORTER) 15 Ton Overhead Bridge Crane, Top Running, AC, Pendant or Cab Controlled, Customer ready to travel to inspect, EAST COAST PREFERRED.

Phone:

Fax:

Email:

Web Site:

1659 FEEDERS

Bar, 12’ Magazine For Swiss CNC Lathe, Send Quotes w/ Photos to Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

Phone:

Fax:

Email:

1710 FLAME CUTTING EQUIPMENT

CNC Torch, 500 Amp Plasma, 4'-6' x 8'-10' table, any mfr., also comparable flame cutting machine

Phone:

Fax:

Email:

Web Site:

2049 GEAR BOXES

6:1 or 5:1 Ratio, Motor: 100 HP D.C. w/ 2000/250 RPM, FAX Preferred

Phone:

Fax:

Email:

shellmachinery@aol.com

2135 GEAR MACHINERY

Hobbers, Grinders, Shavers, Shapers, Chamfers, Generators. Pfauter, Gleason, Fellows, Lorenz, Barber Colman, Liebherr, Sicmat, Red Ring, Reishauer, Kapp, Hofle

Phone:

Fax:

Email:

Hobbers, Grinders, Shavers, Shapers, Chamfers, Generators. Pfauter, Gleason, Fellows, Lorenz, Barber Colman, Liebherr, Sicmat, Red Ring, Reishauer, Kapp, Hofler

Phone:

Fax:

Email:

2180 GEAR SHAPERS

Fellows w/ 10"-12" Strokes

Phone:

Fax:

Email:

2280 GRINDERS, BELT

6"-8" Sundstrand or similar, platen type

Phone:

Fax:

Email:

Web Site:

2369 GRINDERS, CYLINDRICAL, NC/CNC

Mitsubishi, Toyoda, Okuma, Schaudt, Tschudin, Kellerberger, Shigiya

Phone:

Fax:

Email:

5” x 27” or 6” x 40”, Studer, Mitsubishi or Equal, Send Photos To Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

2370 GRINDERS, CYLINDRICAL, PLAIN EXT.

Brown & Sharpe #5, Will Consider 14” or 16”, Customer Will Only Consider #5’s, Send Quotes w/ Photos To Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

2530 GRINDERS, INTERNAL

Bryant, Okamoto, Okuma, Tripet, ’90 or Newer

Phone:

Fax:

Email:

Vertical, NC or CNC, Does Not Need A Lot Of Room Under Rail, Prefer 2 Spdls On Grinders

Phone:

Fax:

Email:

2760 GRINDERS, OTHERS

Surface Type, Okamoto 12 x 24. Send Quotes w/ Photos To Chuck Ledeen At cledeen@orca-inc.com

Phone:

Fax:

Email:

Phone:

Fax:

Email:

Surface Type, Okamoto 12 x 24. Send Quotes w/ Photos To Chuck Ledeen At cledeen@orca-inc.com

Phone:

Fax:

Email:

Surface Type, Okamoto or Equal 16” x 30” Hyd., Send Quotes w/ Photos to Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

2880 HONES - ALSO SEE SUPERFINISHERS

Vertical, Capable Of 20” Dia. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

Vertical Type, Capable Of 20” Dia. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

3060 LATHES, ENGINE

Mazak Slant 60

Phone:

Fax:

Email:

Web Site:

3082 LATHES, NC/CNC

Mitsubishi, 23” x 41”

Phone:

Fax:

Email:

2 Axis, Must Have 3 ½” Spindle Bore Min. Daewoo Preferred, Will Consider Other Builders w/ Fanuc Control. Send Quotes w/ Photos To Chuck Ledeen At cledeen@orca-inc.com

Phone:

Fax:

Email:

2" Capacity, Bar Feeder, Fanuc, Live Tooling, C Axis, '90 Acceptable, '88-'93

Phone:

Fax:

Email:

Mori Seiki w/ Tailstock, 12” Chuck

Phone:

Fax:

Email:

2 Axis, Must Have 3 ½” Spindle Bore Min. Daewoo Preferred, Will Consider Other Builders w/ Fanuc Control. Send Quotes w/ Photos To Chuck Ledeen At cledeen@orca-inc.com

Phone:

Fax:

Email:

Must Have 3.5” Bar Capacity, Sub-Spindle, Must Have Living Milling, w/ or w/o Barfeed. Send Quotes w/ Photos To Theron Horn At thorn@orca-inc.com *

Phone:

Fax:

Email:

Prefer Hardinge or Okuma, A2-6, 4000+ RPM, 10 Station Turret, w/ or w/o Tailstock, ’04+. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

3090 LATHES, OIL FIELD & HOLLOW SPDL.

16", Front & Rear Chucks, 120" Center

Phone:

Fax:

Email:

Web Site:

3209 LATHES, TURRET, NC/CNC

WARNER & SWASEY #4A, 1970 OR NEWER, MUST BE NICE

Phone:

Fax:

Email:

Web Site:

3230 LATHES, VERTICAL, TURRET - ALSO SEE BORING MILLS,

50"-160" Dia.

Phone:

Fax:

Email:

Web Site:

3301 MACHINING CENTER, HORIZ., NC/CNC

Makino, Mazak, Mori, Toyoda, Okuma, Will Consider 2-Pallet Machine, But Prefer Linear Pallet System w/ 1-3 Machine & 12+ Pallet Station, #50 Taper, 1 Degree, 31” X, Y & Z Travels, 10K+ RPM, 1000 PSI Coolant Thru Spindle, 120 ATC, ’04 or Newer. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

500 MM, 10K+ RPM, 1 Deg., High Pressure CTS, Large ATC, ’00+, Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

Phone:

Fax:

Email:

3302 MACHINING CENTER, VERTICAL, NC/CNC

Mazak AJV-60/120 or Larger, Must Be Mazak, Must Be A 2-Pallet Machine. Send Quotes w/ Photos To Matt Klein At mlein@mklein@orca-inc.com

Phone:

Fax:

Email:

47”-50” X-Axis, #40 or #50 Taper, Coolant Thru Spindle, ’97+, Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

Mazak AJV-60/120 or Larger, Must Be Mazak, Must Be A 2-Pallet Machine. Send Quotes w/ Photos To Matt Klein At mlein@mklein@orca-inc.com

Phone:

Fax:

Email:

30”-40” X Axis, 20” Y Axis, #40 or #50 Taper, ’90+. Send Quotes w/ Photos To Matt Klein at mklein@orca-inc.com *

Phone:

Fax:

Email:

Kitamura Mycenter 1XiF, 2XiF or Sim., 15K RPM, #30 or 40 Taper, ’98+. Send Quotes w/ Photos To Matt Klein at mklein@orca-inc.com

Phone:

Fax:

Email:

Haas VF-2, '00 or Newer

Phone:

Fax:

Email:

Phone:

Fax:

Email:

Haas VF-3, ’98 or Newer

Phone:

Fax:

Email:

Haas VF-8

Phone:

Fax:

Email:

Web Site:

Phone:

Fax:

Email:

Phone:

Fax:

Email:

3303 MACHINING CENTERS

5-Axis Gantry Style 5-Axis High Velocity Center, ’98 or Newer, 15,000 + RPM, X-Axis 200”+, Forest Line or Fida Control. Send Quotes w/ Photos To Theron Horn At thorn@orcainc.com

Phone:

Fax:

Email:

3333 MEASURING MACHINES

Coordinate, Zeiss, Must Have C-99 Control & Calypso Software, Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

Coordinate Type,Zeiss, Must Have C-99 Control & Calypso Software, Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

3435 MILLERS, PRODUCTION, SIMPLEX - ALSO SEE MILLERS HY

Kent Owens 2 220, w/ Rise & Fall, (4)

Phone:

Fax:

Email:

3535 MILLERS, VERT., NC/CNC

Bridgeport Style, Must Be Anilam 3200, Must Be '03 or Newer

Phone:

Fax:

Email:

3750 OVENS

Annealing/Stress Relief Type, Parts Are 26” Square x 30” Long, 1800-2000 Degrees. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

4090 PRESSES, HYDRAULIC - ALSO SEE PRESSES, MOLDING & P

100 Ton Brake, 6’ Bed, CNC Back Gauge, Send Quotes w/ Photos To Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

50-75 Ton , C-Frame, Knuth HPK 70 or Sim., Guided Ram, $10K-$15K Budget, Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

4210 PRESSES, S.S. SGL. CRANK

110-120 Ton, 22” x 32” Bed or Sim., 24” Shut Height, 60-100 Strokes/Min., ’95 or Newer

Phone:

Fax:

Email:

4270 PRESSES, OTHERS

100 Ton, Hydraulic Type, 4-Post, 48" x 60", 36"-40" Shut Height, Sliding Bolster, Swing-Out Top Ram

Phone:

Fax:

Email:

Bruderer 75 Ton, Stamping Type, High Speed Type, Send Quotes w/ Photos To Theron Horn At thorn@orca-inc.com

Phone:

Fax:

Email:

4545 ROLLS, PINCH - ALSO SEE PINCH ROLLS

Customer is looking for a 5' x 10 GA Initial Pinch Plate Roll, East Coast.

Phone:

Fax:

Email:

Web Site:

4575 ROLLS, OTHERS

Plate Type, ½”-5/8” x 6’-10’, 3-Roll Initial Pinch, $35K, Budget. Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email:

4604 SANDERS, BELT - ALSO SEE GRINDERS, BELT

Our Customer needs a 37" Timesaver Wet Sander ASAP

Phone:

Fax:

Email:

Web Site:

4785 SHEARS, POWER SQUARING

**** URGENT **** WE NEED A PARTS MANUAL FOR A PEAROSN 12' X 1/4" HYDRAULIC POWER SQUARING SHEAR, PLEASE CONTACT US IF YOU HAVE ONE AVAILABE !!

Phone:

Fax:

Email:

Web Site:

4825 SLITTING LINES - ALSO SEE CUT-OFF LINES

48” x 5”-6”, FAX Preferred

Phone:

Fax:

Email:

shellmachinery@aol.com

4845 SPLINE ROLLING MACHINES

Roto-Flo, Michigan Tool, Anderson Cook, Escofier; All Sizes

Phone:

Fax:

Email:

4880 SUPERFINISHERS - ALSO SEE HONES

GISHOLT

Phone:

Fax:

Email:

Web Site:

5093 TURNING CENTER, NC/CNC

Phone:

Fax:

Email:

5184 WATER JET CUTTERS

30,000-55,000 PSI, 30 HP+, Customer Will Consider 4’-6’ x 5’-12’ Bed, Send Quotes w/ Photos To Matt Klein At mklein@orca-inc.com

Phone:

Fax:

Email: